24
Using the TV’s menu
$9763(/&7$8(QJOLVK
FEATURES
SLEEP TIMER
You can set the TV to automatically turn off
after a specified period of time.
1 Choose SLEEP TIMER, then press
the a
aa
a button
A Sub-menu of the SLEEP TIMER
function appears.
2 Press the 5
55
5 buttons to set the
period of time.
Then press the a
aa
a button
You can set the period of time a
maximum of 120 minutes (2 hours) in 10
minute increments.
• One minute before the SLEEP TIMER
function turns off the TV, “GOOD
NIGHT!” appears.
• The SLEEP TIMER function cannot
be used to turn off the TV’s main
power.
• When the SLEEP TIMER function is
on, you can display the Sub-menu of
the SLEEP TIMER function again to
confirm and/or change the remaining
period of time of the SLEEP TIMER
function. Press the a button to exit
the menu after confirming and/or
changing the remaining time.
To cancel the SLEEP TIMER
function:
Press the 2 button to set a period of time
to “OFF”.
BLUE BACK
You can set the TV to automatically change
to a blue screen and mute the sound if the
signal is weak or absent, or when there is no
input from an external device.
ON:
This function is turned on.
OFF:
This function is turned off.
CHILD LOCK
When there is a TV channel you wish your
children not to watch, you can use the
CHILD LOCK function to lock out the TV
channel. Even when a child chooses a
Programme number (PR) in which a locked
TV channel has been registered, the screen
will change to blue and displays n (CHILD
LOCK) so the TV channel cannot be viewed.
Unless you enter a pre-set ID number by a
special operation, the lock cannot be released
and the child cannot view the TV channel
programmes.
To set the CHILD LOCK function
1 Choose CHILD LOCK, then press
the o
oo
o button
“SET ID NO.” (ID number setting screen)
appears.
2 Set the ID number to your liking
1 Press the 6
66
6 buttons to choose
a number.
2 Press the 5
55
5 buttons to move
the cursor.
AV-32&28T35SPE_Eng.fm Page 24 Thursday, February 6, 2003 2:29 PM
