Onscreen Menus
INITIAL SETUP 2
INITIAL SETUP 1
FRONT PANEL CONTROL
(Will appear only when M
ENU button
on TV Front Panel is pressed.)
Using the Onscreen Menus
To open the Onscreen Menu system, press the MENU button on the remote control. You
navigate within the Onscreen menus by using the four directional arrow buttons on the remote
control. (These buttons are also the CH
+/- and VOL +/- buttons - Channel and Volume
functions will not operate when the Onscreen Menu is active).
The selected feature and option on a menu screen are highlighted in a different color.
To move to a different feature use the arrows to move up or down the list. When you
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen
will appear. Use the arrows ¥to select an option from the highlighted feature. Pressing E
XIT
on the remote control will close the Onscreen Menu system and return you to normal television
viewing.
Each menu and its features will be discussed in the following pages of this guide.
Notes: You may also move to the next menu screen by pressing M
ENU again.
• If you do not press any buttons for a few seconds, the Onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
27
Selected Option
(Yellow)
Selected Option
(Blue or Green)
Note: The DIGITAL-IN menu can only be
displayed when a 480p picture signal is input
to the Digital-In terminal and the picture is
being displayed on the screen.
