20
TV/VIDEO
MENU
AV Select
011
1 SD / USB
2 HDMI I 1
3 HDMI I 2
4 HDMI I 3
5 Video - 1
6 Video - 2
7PC
OK
1. Select
2. Set
OK
Enter
Auto Program
f
Edit / Manual
f
Language
f
Video-1 Setting
Component
Rocket Sart
On
Teletext Language
f
HDMI Setting
f
PC Setting
Set Up
Select the input Source.
Operate the connected device and play video.
•
1. Select "Set Up".
2. Select item.
Watching Video or DVDs
Auto Program
f
Edit / Manual
f
Language
f
Video-1 Setting
Component
Rocket Sart
On
Teletext Language
f
HDMI Setting
f
PC Setting
Set Up
OK
1. Select item
3. Set
2. Setting or Adjust
Video - 1 Setting
Switch between video and component signal.
(Video / Component)
HDMI Setting Setting for HDMI input
> HDMI Setting
HDMI-1
Size
e
Auto
f
Aduio
Digital
Mode 1
HDMI-2
Size Auto
Mode 1
HDMI-3
Size Auto
Mode 1
Set Up
Size
Normally set to "Auto." If wrong :
screen size appears in 480p (525p),
change to "1" or "2".
Audio
Normally set to "Auto." If no sound, :
change to "Analogue" or "Digital.
Mode
If no picture, change to "1" or "2". :
PC Setting
Setting for PC input
> PC Setting
PC Position
f
Phase
Pixel
Set Up
OK
1. Adjust
2. Set
OK
1. Select PC Position
2. Enter
PC Position : Adjust screen position.
Phase : Sets the focus of screen.
Pixel : Adjusts the horizontal feature of screen.
Connect "DVI" devices
What is "Full Native" ?
Full Full Native
Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
HDMI-1.
Set "Audio" in "HDMI Setting" to "Analogue" or "Auto".•
HDMI-2 and HDMI-3 input does not support analogue sound (IN HDMI-1).
•
HDMI-2 and HDMI-3 input does not support DVI devices.•
With the full HD LCD display and "Full Native", you can enjoy full native •
HD resolution of 1920 x 1080. It exposes fl aws in the video that were
hidden when viewing on "Full".
The illustrations are emphasised to make clear differences between
•
"Full" and "Full Native".
Dark bar or noise may appear at the edges of the screen when viewing •
in "Full native" for some videos. This is resulted from the signal itself, not
due to TV malfunction.
Technical information
GGT0359-001A-H-EN.indd 20GGT0359-001A-H-EN.indd 20 19/07/2010 14:10:0819/07/2010 14:10:08
