10
Preparation
Flow of Connection/Setup
Connect the unit to the computer, and configure the appropriate settings on a browser.
Starting shooting
1 Connect the camera to your computer via the supplied LAN cable. (
➭
page 11)
To set up the camera, first connect it to your computer.
2 Connect the AC adapter. (
➭
page 12)
Connect the supplied AC adapter when the connections are complete.
3 Access the unit from a browser to configure the appropriate settings. (
➭
page 15)
Set the password, image quality, connection destination, etc. Configuring the correct settings allows you to
view recorded data on a computer or smartphone.
4 Secure the camera to the pantilter. (
➭
page 25)
Secure the camera to the pantilter.
• Attach an optional item if necessary.
Insert/Attach an SD card (
➭
page 28), battery (
➭
page 29), external mic (
➭
page 30), and AV cord (
➭
page 31).
• See "Establishing a wired connection" (page 27) to connect the unit with the LAN cable.
