51
Camera Page
This page is for setting the camera’s parameters.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [Camera]. Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● To restore the settings of this page to the factory settings, press [Initialize] button.
A
C
E
G
I
K
M
Click
A Camera ID Character strings entered here will be written to the JPEG comment segment
(item name: ACameraB). Refer to the [API Guide] (provided CD-ROM) on the
file formats of JPEG.
B
Monitor Type
For selecting the monitor type according to the monitor used to display the
video images. The picture quality varies according to the type of monitor
selected.
Custom : Enables setting of picture quality according to the user’s
preference.
LCD1, LCD2 : Picture quality setting for LCD monitors. Two types are
available for selection according to the user’s preference.
CRT : Picture quality setting for CRT (cathode-ray tube) monitors.
[Setting value:Custom, LCD1, LCD2, CRT]
C Black Level For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range:0 to 2]
emo:
● If the black level is set to A0B, this may be too low depending on the
connected device, or dark area will become complete black.
● When using MPEG4 images, set to either A1B or A2B.
