- 29 -
Reset
Press BLUE button to reset the picture
modes to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
Sound Menu
As you enter the main menu, sound will be
the second item. In the main menu, select
Sound using or button, then enter
the sound menu by pressing
/ or
OK button.
Setting Volume
As you enter the sound menu, Volume will
be the first selected option.
Press
button to increase volume.
Press
button to decrease volume.
Or you can directly change the volume set-
tings using
+ (to increase) or - (to
decrease) button.
Setting Bass Level
Using
or button select Bass
Level.
Press
button to increase bass level.
Press button to decrease bass level.
Setting Treble Level
Using
or button select Treble
Press
button to increase treble level.
Press
button to decrease treble level
Setting Balance
It allows adjusting the distribution between
the left and right speakers.
Using
or button select Balance.
Press
button to change balance right-
ward.
Press
button to change balance left-
ward.
Hyper Sound
Using
or button select Hyper
Sound.
Pressing or button will turn on or off
this feature.
Pseudo/spatial effect can be turned on or off
via the Hyper Sound item in the Sound
menu or by remote control. In Mono trans-
mission the left and right channels will be
added at left channel and dummy stereo ef-
fect will be introduced to end-user.
In stereo transmission it yields a phase dif-
ference between left and right channels.
To Change Audio Out Settings
Audio Out is a sub-menu of Sound menu.
Use this settings to adjust volume for audio
out terminal which is located at the right side
of the TV.
Using
or button select Audio Out.
Press
or button or directly press
OK button on Audio Out, to enter the Audio
Out menu.
Audio Out Volume
As you enter the Audio Out sound menu,
Volume will be the only option.
Press button to increase volume.
Press
button to decrease volume.
ENG-20710W-17MB16P-1895UK-(LT-20DA6SK)-50076128.p65 18.10.2005, 08:3929
