Remote control buttons and functions
13
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
Choose a TV channel and
watch images from external
devices
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
•PR 6 → press 6
• PR 12 → press 1 and 2
Use the p p buttons:
Press the p p buttons to
choose the programme number
(PR) you want or an VIDEO
terminal.
Use the G button:
Press the G button to choose an
VIDEO terminal.
• You can choose a video input signal from
the S-VIDEO signal (Y/C signal) and
regular video signal (composite signal).
For details, see “VIDEO-3 SETTING” on
page 33.
• If you do not have a clear picture or no
colour appears, follow the operation
procedure “COLOUR SYSTEM” on
page 24.
• If you choose a VIDEO terminal with no
input signal, the VIDEO terminal number
becomes fixed on the screen.
• Since this TV is designed to make full use
of the resolution of the original video
source, the motion may appear unnatural
when the video source is input with
progressive-scanning component signals.
If this happens, change the output setting
of the connected device to interlace-
scanning component signal output. See
the instructions that came with the device
for more information.
• The PC sound is the same as the VIDEO-3
sound.
To return to a TV channel:
Press the b button, the p p buttons or
the number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR/DVD recorder are
connected only by the aerial cable, choosing
the programme number PR 0 (AV) allows
you to view images from the VCR/DVD
recorder. Set the VCR/DVD recorder RF
channel to the programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 29.
Pressing the G button changes the choice as
follows:
• The VCR/DVD recorder sends its
playback image along the aerial cable as
an RF (radio frequency) signal.
• Also see your VCR/DVD recorder
instruction manual.
TV mode VIDEO modes
Programme
numbers
PR 1 – PR 99
or
TV mode VIDEO modes
Programme
numbers
PR 1 – PR 99
PR 0
or
LT-32&26AX5_Eng.book Page 13 Thursday, August 18, 2005 10:07 AM
