42
ENGLISH
Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN terminals.
~ Press [SOURCE], then press [AV-IN]. (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Turn on the connected component and start playing the source.
To display the operation buttons (☞ page 17) while watching the playback picture
• If no operations are done for about five seconds, the operation buttons disappear.
• [KEY] does not work when the source is “AV-IN.”
Touch the screen (center portion).
You can easily access to <Aspect> setting
menu by pressing [SHORT CUT] on the
touch panel, then...
Assigned title (☞ page 46)
Sound mode (☞ page 45)
Touch the screen (center portion).
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].
These buttons also work when they are not shown on the touch panel (while watching the playback picture).
☞ page 45
EN_KW-AVX710[J].indb 42EN_KW-AVX710[J].indb 42 07.12.5 11:59:21 AM07.12.5 11:59:21 AM
