EN 21
Setting Up the Camera Using RM-P2580
Setup Procedure
In systems using an RM-P2580 remote control unit, the menus
for use during camera setup can be displayed on the remote
control unit. (Please refer to the Instructions for RM-P2580.)
8 Setting the camera menus from RM-P2580
1 Set the Power switch on the rear panel of the RM-P2580 to
ON.
●The POWER lamp lights up.
2 Press and hold the MENU button for 3 seconds.
●The LED of the MENU button lights up.
●The ASETUPB menu of the remote control unit is displayed on the
monitor connected to MONITOR OUTPUT 1.
3 Move the PAN lever downward to move the cursor (E) to
ACAMERA..B in the menu.
●Tilting the lever upward (J) moves the cursor upward.
●Tilting the lever downward (K) moves the cursor downward.
4 Press the SET button.
●The AMENUB screen for the camera is displayed.
●Items followed by A..B have further submenus.
5 Tilt the PAN lever up or down to select an item.
6 Tilt the PAN lever to the left or right to change the value of
the item.
●Tilting the lever toward the left (H) decreases the value.
●Tilting the lever toward the right (I) increases the value.
Upon changing the set value of items, a change mark (*) will appear as
indicated in the left diagram. Please refer to the following pages for
details on setting of the sub-menu.
7 Press the MENU button.
After completing the setup of the menu items, press the MENU button to
return to the previous menu screen.
MEMO
●To prevent malfunction of the camera, do not perform menu operation until
initialization of the camera has completed.
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILTLENS
CAMERA/POSITION
CAMERA POSITION
REMOTECONTROLUNIT
RM-P2580
ALARM
POWER
KEYLOCK
MENU button
POWER lamp
SET button
PAN lever
Power switch
(Rear panel)
SETUP
POSITION SETUP. .
CAMERA. .
CONTROL UNIT. .
SETUP menu of the remote control unit
cursor
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
<
MENU
>
EXIT
<
SET
>
SUB MENU
MENU screen for the camera
Indication of presence of
submenus
CAMERA FUNCTION1
V. PHASE - - -
POS. TITLE LOC. UP-L
PRIVATE MASK..
MANUAL DISPLAY ON
<
MENU
>
RETURN
Example of a submenu
Change mark
