45
Sound Adjustments
Sound adjustment operations are only possible while the receiver is ready for Zone 1 operations.
Adjustment Menu Configuration
ADJUST MENU
1 PARAMETRIC EQ
(See page 48.)
2 MIDNIGHT MODE
(See page 49.)
3 EFFECT ADJUST
(See page 49.)
(When DSP is activated)
(When Pro Logic II Music
is activated)
(When one of the other modes
is activated, or when the source is
“DVD MULTI” or “EXT 7.1CH”)
(When Neo:6 Music
is activated)
Note:
When performing sound adjustments viewing the indications on the
main unit’s display, the indications shown are slightly different from
what are shown on the on-screen display.
This is because of the limited number of characters shown on the
main unit’s display.
Ex. •“PEQ SURR BACK” is shown as “PEQ SBACK” on the main
unit’s display.
•“TREBLE LEVEL” is shown as “TREBLE LVL” on the main unit’s
display.
NOTICE—
• If Analog Direct is in use (see page 27), you cannot make
any sound adjustments using the Adjustment Menu.
• Items on the menus shown above are all set to the initial
values when shipped from the factory.
• Some of the menus or some items on the menu cannot be
shown or cannot be adjusted. (For details, see the respective
explanations in this section.)
EN45-50_RX-DP20VBK[J]f 03.2.28, 20:0445
