Masterpage:Right+
EN 51
Filename [DVM700EU_11Editing.fm]
EDITING
Page 51 Wednesday, 25 January 2006 10:28
You can use your unit as the source player or as the recording
deck.
1 Make connections.
A When using your unit as the source player:
^ connect its [S-VIDEO OUTPUT] connectors to the input
connectors on another recorder.
B When using your unit as the recording deck:
^ connect its [S-VIDEO INPUT] connectors on the front or rear
panel to the output connectors on another recorder.
● When connecting to another recorder with S-video connector,
set AL-1 INPUTB or AF-1 INPUTB to AS-VIDEOB.
2 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select the external input.
● Select AF-1B when the source player is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select AL-1B when it is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
3 Press REC MODE repeatedly to set the recording mode.
4 Engage the Play mode on the source player.
5 Engage the Record mode on the recording deck.
6 Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 58)
Edit To Or From Another Recorder
NOTES:
● When using another recorder as the recording deck, refer to its
instruction manual.
● It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
A When using your unit as the source player
B When using your unit as the recording deck
Recorder
Your unit
Another recorder
Player
TV
Player
Your unit
Another recorder
Recorder
TV
●
Slide the TV/DVD switch to DVD.
DVM700EU_00.book Page 51 Wednesday, January 25, 2006 10:28 AM
