
Menu Settings
3. OSD Settings
Use the OSD menu to set up the camera for optimum performance
Figure 3-1 Main menu
3.1 Lens
The LENS settings allow you to configure Lens and brightness. Options are AUTO (Auto Iris lens) and
MANUAL. The default setting is AUTO.
In the AUTO submenu, you can set the MODE as OPEN, CLOSE or AUTO. Then select SPEED to
adjust the DC Iris Lens convergence speed.
3.2 SHUTTER/AGC
You can set the SHUTTER/AGC as AUTO or MANUAL. The default setting is AUTO.
When LENS is set to AUTO: It is recommended to set SHUTTER/AGC to AUTO mode. In the AUTO
submenu, adjust HIGH LUMINANCE MODE according to your application:
• AUTO IRIS mode: Use this for normal condition application environments. The IRIS level will be
controlled by camera brightness.
• SHUT+AUTO IRIS mode: Use this for high light application environments. The exposure will be
controlled by AES or the DC Iris. The iris level will be controlled by camera brightness.
LENSAUTO
SHUTTER/AGCAUTO
WHITEBALATW
BACKLIGHTOFF
PICTADJUST
ATROFF
MOTIONDETOFF
NEXT
EXITSAVEALL
PRIVACYOFF
DAY/NIGHTAUTO
NR
CAMERAIDOFF
SYNCINT
LANGUAGEENGLISH
CAMERARESET
BACK
EXITSAVEALL
TYPEDC
MODEOPEN
SPEED046
RETURN
HIGHLUMINANCE
MODEAUTOIRIS
BRIGHTNESS024
LOWLUMINANCE
MODEAGC
BRIGHTNESSx0.25
RETURN