29
6-5 Sensor recording
6 RECORDING (contd.)
When an alarm signal is input to the rear panel [ALARM IN] terminal in the Stop mode, sensor recording starts in the mode set
with the menu switch.
1. Connect an alarm sensor.
Connect the alarm sensor to the rear panel [ALARM IN]
terminal.
2. Turn the power ON.
Check the connections and set the [POWER] switch on
the rear panel to ON.
3. Set the menu switches.
Set the required menu switches. For details, refer to
“Setting” on page 18.
Ⅵ [ALARM/SENSOR MODE]
⅙ [REC MODE] : Set to “SENSOR”. (S) lights on the
display panel for the [SENSOR] indication.
⅙ [REC DURATION] : Select how long you want sensor
recording to continue after an alarm signal is
received.
⅙ [PRESENSOR REC] : Set to “ON” to execute pre-
sensor recording.
⅙ [PRESENSOR REC DURATION] : Set the time for
pre-sensor recording.
Ⅵ [BUZZER]
⅙ [ALARM/SENSOR]: Set to “ON” to sound the buzzer
during sensor recording.
Reference: “5-3 Menu switch details” on page 21.
4. Engage the Sensor Recording Standby mode.
Engage the Stop mode. When an alarm signal is
received, sensor recording starts (see step 3 above).
* To stop the buzzer during sensor recording, press the
[CANCEL] button.
Memo:
● Sensor recording speed <REC SPEED> is fixed at
“30”. <AUDIO REC> is fixed to “ON”.
● <REC QUALITY> for sensor recording is set with
<DVR MODE>.
Pre-sensor recording
ⅷ In the Pre-sensor Recording mode, recording starts from
the point before an alarm signal is input during sensor
recording.
<Example>
• When <SENSOR REC> and <PRESENSOR REC> are
set to
“ON
” and <PRESENSOR REC DURATION> is set
to “30” sec.
POWER
WARNING
SLEEP
REC STOP PLAY STILL
TIMER CANCEL
DISPLAY
MENU
SEARCH
S
E
L
E
C
T
REV FWD
EXECUTE
SKIP/ALARM
SEARCH
REC
CLOCK RESET/ CLEAR
OPE. LOCK
ON
DIGITALVIDEORECORDER VR-510U
[MENU] button
Jog dial
Shuttle search dial
[CANCEL] button
[REC] button
Alarm signal
Time
<30 sec.>
Sensor Recording
Standby (Stop)
mode
Sensor recording
Pre-sensor
recording:
Normally recording
is performed with
camera switching.
[
EXT MODE
]
REC DUR
A
TION
10SEC
1.REC
MODE OFF
1.REC
MODE OR
2.REC
DURAT ONI
2.HDD
FULL OUT OFF
[
ALARM SENSOR MODE]
1
S
80
N
E
S
S
EC
3.PRES
E
N
SO
R
4.PRES
E
N
SO
R
R
E
COFF
OGJ
[ALARM/SENSOR MODE] screen
Set to “SENSOR”.
3.
(S) SENSOR ON indication
Caution:
● Do not use the Sleep mode in the Sensor Recording
Standby mode. If the Sleep mode is engaged, there
will be a delay between the time an alarm signal is
received and sensor recording starts. No images will
be recorded during this period.
Memo:
● Even though <PRESENSOR REC> is set to “OFF”,
pre-sensor recording may be performed for about 1
second.
