8
Cleaning
Before cleaning, switch the power off
at the power point and then unplug
the power cord.
Allow the Toastie Maker to cool
slightly. The Toastie Maker is easier to
clean when slightly warm.
Always clean your Toastie Maker after
each use to prevent a build up of
baked-on foods.
Wipe cooking plates with a soft
damp cloth to remove food residue.
To remove baked-on food residue,
squeeze some hot water over the
food residue then clean with a non-
abrasive, soft scouring pad. Wipe
clean and dry thoroughly with a soft
clean, cloth.
NOTE: The cooking plates have
a non-stick coating. Do not use
abrasives or metal utensils to
remove food residue as they will
scratch and damage the coating.
NOTE: Do not use spray-on
non-stick cooking sprays or
oils as these may affect the
performance of the non-stick
surface on the cooking plates.
WARNING: Do not
immerse any part of
your Kambrook Toastie
Maker in water or any
other liquid.
Care, Cleaning and Storage
Storage
Switch the Toastie Maker off at the
power point and unplug the power
cord from the power point. Allow to
cool completely.
Follow cleaning instructions and
ensure appliance is completely dry.
Lock the storage clip along the
side arm towards the front handle
of the Toastie Maker so that the
top and bottom cooking plates are
locked together.
Wrap the power cord around the
cord storage area underneath
the appliance.
Store the Toastie Maker on a flat, dry
level surface. Do not place anything
on top of the Toastie Maker.
NOTE: For convenience
the Toastie Maker may be
stored standing upright in the
vertical position.
NOTE: The locking storage
clips should not be used to
clamp down the top plate
when sandwiches are in the
Toastie Maker.
WARNING: When moving
the Toastie Maker, never
lift the Toastie Maker by
the power cord.
