A SERVICE OF

logo

Open as PDF
next previous
32
ENG
ENGLISH
WATCHINGTV
CableDTVSetting
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Cable
DTVSetting and press OK.
5 Press the Navigation buttons to scroll to Serv-
iceOperatororChannelAutoupdate and
press OK.
6 Select your desired Source.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
SatelliteDTVSetting
You can add or delete a satellite setting ID.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Satel-
liteDTVSetting and press OK.
5 Select your desired setting ID.
You can change the following settings for each
setting ID for your preferences.
(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)
(In Cable, Cable & Satellite(-Only Satellite models)
mode only)
Option Description
Satellite Select your desired Satellite.
LNB
Frequency
Select one value fromUniversal,9750,
10600,5150.
If you select Universal for LNB Frequency
which is 9750/10600(MHz), 22KHzTone
is disabled.
If you cannot find the LNB frequency value
from the list, select Userand manually
enter the frequency.
22KHzTone When using 22KHz Tone switch, select A
or B. If you use 22KHz Tone, ToneBurst
and MotorizedSystem are disabled.
ToneBurst When using Tone Burst switch, select A
or B. If you use Tone Burst, 22KHzTone
and MotorizedSystem are disabled.
LNBPower To enable the power supply for the LNB,
select On.
If you select Off, MotorizedSystem is
disabled.
DiSEqC When using DiSEqC, select one option
from
DiSEqCA~D. If you use DiSEqC,
MotorizedSystem is disabled.
Motorized
System
When using the motor, select On. To set
the antenna position, press OK button
and move the motor. If you use the motor,
22KHzTone,ToneBurstand DiSEqC
are disabled.
NOTE
WhenChannelAutoUpdate is On, you can
update information for all the programmes
that can be updated, including the pro-
gramme currently being watched.
When
ChannelAutoUpdate is Off, you can
only update information for the programme
currently being watched.
You can not select the
CableDTVSetting
when the service operator is set to "Ziggo".
Downloaded From TV-Manual.com Manuals