102
repeat until the name is correct, then press
ENT|ENT. B. Jump down to
the lower selection list by pressing
ENT, then press ↓ or ↑ to select a
highway from the list, then press
ENT.
3. Once you have selected a highway name you can then select an exit.
Press ↓ to switch to the Exit List, then use ↓ or ↑ to highlight the exit
you want and press
ENT. That will launch the Exit information window.
Find Exit menu (left) with Exit information
screen (right). Go To Exit is highlighted.
4. In the Exit Information screen you have two choices. A. Press ENT to
navigate or
GO TO the exit. B. Press →|ENT to find the exit on the map.
Tip:
You can also look up additional information on services located near
this exit. Press ↓ to
SERVICES|↓ or ↑ to select service name|ENT.
Find Map Places or Points of Interest (POI)
1. Press FIND|↓ to MAP PLACES|ENT.
Easy Mode Find menu (left); Advanced Mode Find menu (right).
2. Press ↓ or ↑ to select a Map Place or POI category then press ENT.
(To narrow your search, press ← or → to select a subcategory before
pressing
ENT.) You will be given two options: search for Nearest or
search by Name.
