4
HOOKUP DIAGRAMS
Quick-Start
Make all initial connections with the
power switches OFF on all equip-
ment. Make sure all master volume,
level, or gain controls are all the way
down.
1. Connect the line-level outputs from your mixing
console (or other signal source) to the inputs of
your power amplifi er.
S225: WITH A MIXER AND TWO POWER AMPLIFIERS
2. Connect the “Speaker Output” from your power
amplifi er (or powered mixer) to the INPUT connec-
tor on the S225.
3. Turn on your mixing console (or other signal
source).
4. Turn on the amplifi er. Turn up its volume or gain
control(s) as recommended by the manufacturer.
5. Start the signal source, whether it be speaking
into a microphone or starting a CD player. Adjust
the volume controls on the mixer (or other signal
source) for normal operation.
S225: WITH A MIXER AND POWER AMPLIFIER
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W • PEAK / 2800W
PIN 1 + +
PIN 1 - -
TIP +
SLEEVE -
1/4"NL4
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W • PEAK / 2800W
PIN 1 + +
PIN 1 - -
TIP +
SLEEVE -
1/4"NL4
S225 S225
Mixer or
Preamplifier
Right
Line-level
Output
Left
Line-level
Output
Stereo
Power Amplifier
1202-VLZ PRO
S225
1202-VLZPRO
Stereo Power Amplifier
Stereo Power Amplifier
From LEFT
SPEAKER OUT
From RIGHT
SPEAKER OUT
From LEFT
SPEAKER OUT
From RIGHT
SPEAKER OUT
Line-level
THRU Connection
S225
S225S225
