Remote Control Buttons (cont’d) 23
FF/SEARCH B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on-screen. Details are on page 46.
Press to change the setting of an item in the on-screen menu or
press to proceed to the next menu. Press to adjust the picture
controls. Details are on pages 24 - 25.
CHANNEL o/p Buttons
Press to scan through the TV/VCR’s channels.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
MEMORY Button
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 44. Or, press to memorize
the start and end position on a tape when setting up A-B Repeat
Play. Details are on pages 42 - 43.
MENU Button
Press to display the pop up menu. You may also use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 20.
PLAY/▲ Button
Press to play a tape. Details are on page 28. Press to release Search
or Still mode and return to normal playback. Details are on page
46. Press to select an item in the on-screen menu.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status
display. Details are on page 26. Press to exit the on-screen menu.
SLEEP Button
Press to set the sleep timer. Details are on page 37.
SPEED Button
Press to select the recording speed (SP, LP, or SLP).
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
CCZ130comb 4/5/99 7:32 PM Page 23
