TO ADJUST PRESS { / B
24 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, pic-
ture, color, tint, and sharpness.
• The menus on page 25 will disap-
pear if you do not make adjust-
ments within 60 seconds.
• The original settings will probably
give you the best picture quality.
• To reset the picture controls to
the original settings, press the
MENU button, then press the
PLAY/▲ button or the STOP/▼
button to select TV RESET, then
press the F.FWD/B button. TV
RESET COMPLETED will appear
on the screen briefly.
Helpful Hints
> BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ but-
ton to select the desired control (BRIGHT-
NESS, for example).
3
Press the REW(ind)/{ button or the
F.FWD/B button to adjust the picture control.
(Refer to the chart on page 25.)
4
When you finish, press the STATUS/EXIT but-
ton.
