2
TABLE OF CONTENTS
1. Scope
2. Applicable document:
3. Electric specification:
3.1 AC input requirement:
3.1.1 AC input requirement
3.1.2 Over current protection
3.1.3 Inrush current limiting
3.1.4 Input under voltage
3.1.5 Electrical fast transient/burst
3.2 DC output requirements:
3.2.1 DC voltage regulation
3.2.2 remote sense
3.3 power distribution:
3.3.1 Output requirement
3.3.2 Efficiency
3.3.3 Output ripple and noise
3.3.4 Output transient response
3.3.5 +5Vdc and +3.3Vdc power sequencing
3.3.6 voltage hold-up time
3.4 Timing / housekeeping / control
3.4.1 Power_OK
3.4.2 Power_ON
3.4.3 +5Vsb
3.4.4 Power ON time
3.4.5 Rise time
3.4.6 Overshoot at turn_on/turn_off
3.4.7 Reset after shutdown
3.4.8 +5vsb at power down
3.5 Output protection:
3.5.1 Over voltage protection
3.5.2 Short circuit protection
3.5.3 No load operation
3.5.4 Over current protection
3.5.5 Over load protection
3.5.6 Output bypass
