6
RADIO OPERATION
Set the VOLUME control 1 to minimum
and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE
(
®p)/POWER ON button 2 to turn the
unit on.
1
TO LISTEN TO THE RADIO
Slide the FUNCTION switch 1 to the RADIO
position. Press the MENU/ESP/BAND
button
2 to select a band (AM or FM). If
listening to FM, press the MODE/
➛ button
3 to select Stereo or Mono.
2
Press and release the Skip/TUNING DN
o 1 or UP n 2 button to tune a station.
Press and hold the Skip/TUNING DN
o
1
or UP n 2 button for rapid search
tuning.
3
Adjust the VOLUME control 1 and DBBS
switch
2 as desired. If FM STEREO
reception is weak/noisy, press the
MODE/➛☎button 3 to Mono, in this case
the reception will be monaural.
4
To turn the radio off, press the STOP
(■)/POWER OFF button.
5
ANTENNAS
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the Skip/TUNING DN o or
UP
n button for approximately 1 second and
the unit will automatically search for the next
available station.
