Switch the mecablitz to manual mode M (choose a
partal light output level, if necessary). Set switch
ባ on the SCA adapter to the left NORM position.
The indicator ቤ on the SCA adapter is illuminated
in green.
The indicator ቤ flashes in green to warn you
if the operating mode „TTL“ is set on the
mecablitz. In such an instance an uncontrolled
full-output flash would be fired when the pic-
ture is shot.
Operating mode „A“ or „M“ can be selected on the
camera.
mecablitz 40 MZ-...,
44 MZ-2, 50 MZ-5, 54 MZ-...
and 70 MZ-... :
The CCD ISO sensitivity and aperture settings on
the mecablitz are automatically adjusted to the
settings made on the camera. Select a suitable
aperture on the camera and choose an adequate
partial light output on the mecablitz for the existing
photographic situation.
mecablitz 32 Z-2,
32 MZ-3, 45 CL-3 / 4, 60 CT
-4:
On the mecablitz, the CCD ISO sensitivity must be
adjusted by hand to the value set on the camera.
The aperture calculator of the mecablitz indicates
the flash-to-subject distance required for the aper-
ture selected on the camera to obtain a correct
flash exposure. Select a suitable aperture on the
camera and choose an adequate partial light out-
put on the mecablitz for the existing photographic
situation.
☞
11
705 47 0025.A2-GB,I,E 13.11.2006 9:50 Uhr Seite 11
