Joining the two appliances
together
The following fixing parts are supplied:
* Colour depending on model (the other
colour variations are not needed)
The following tools are supplied:
r SW 10 spanner
q SW2 allen key
(not required)
You will also need the following:
–
Spirit level
–
Cordless screwdriver
–
Torx
®
25 screwdriver
^
Before starting, peel off any
protective foil from the appliance
casing.
Installation steps at the front of the
appliances
^ Use spanner r supplied to screw in
feet (for supporting the appliance
doors) a completely. They must not
come in contact with the floor.
^ Fit covers a to the four front feet.
^
Place the appliances next to one
another so that the fronts are aligned,
leaving a gap of 10 mm between
them.
Installing in a side-by-side combination
36
