Securing the appliance in the
niche
^ Press the appliance against the
housing unit on the hinge side.
^ To fix the appliance to the housing
unit at the top and bottom, screw the
long4x20mmchip board screws a
into the hinges at the top and bottom.
^ Loosen screws b on the top and
bottom fixing brackets c.
^ Press fixing bracket c against the
side wall and tighten screws b.
^
Attach fixing bracket c to the
housing unit side wall with screws d.
Drill holes in the housing unit side
walls if necessary.
^
Break off the protruding end of top
cover e, turn the cover around and
fit it on top fixing bracket c.
^
Fit oblong cover f onto top fixing
bracket c.
Building in the appliance
57
