Programming and storing in
memory
The programmable functions are acti-
vated using the additional option but-
tons and the programme selector in
special combinations, which intro-
duce extra features not marked up
on the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
1 The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2 Press the additional option buttons
"Soak" and "Pre-wash" at the same
time and hold pressed in and:. . .
3 . . . switch the machine on with the
“I-ON/0-OFF”-button.
4 Release all these buttons.
P O appears in the "time" display.
2. Selecting a programmable function
5 For the programmable function re-
quired turn the programme selector
to the setting given:
– for P1 High Water level
to – MIXED WASH Poly/Cottons –
– for P2 Water plus system
to – Separate rinse –
– for P4 activate i compartment
to – Spin –
– for P9 Gentle action
to – WOOLLENS 40°C –
– for P10 Activate top-up rinse for
COTTONS wash
to – DELICATES cold –
– for P11 Memory Function
to – DELICATES 30°C –
6 In the Display the P now flashes alter-
nating with the number of the pro-
grammable function
e.g. P...1...P...1
The following also appears on the right:
O = Programmable function is
not active
1 = Programmable function
is
active
with P 2, a 2 appears on the right = Op-
tion 2 is active.
Programmable functions
33
