Introduction 1
1-4
1.5 Special considerations for programming equipment
1.5.1 FX CPU version 3.07 or later and FX
2C
Example usage
This format is ver
important for the instruction to operate
correctl
.The user must pro
ram the ’mimic’ instruction
with the modif
in
M coil in a SET instruction immediatel
before the instruction to be modified.
Peripherals Table
Description Model Number
System software version which will.......
....require the use of
auxiliary M coils
....program all instructions
directly
Hand held
pro
rammer (HHP)
FX-10P-E V 1.10 from V 2.00
HHP cassette FX-20P-MFXA-E V 1.20 from V 2.00
Pro
rammin
software
FX-PCS/AT-E-KIT V 1.01 from V 2.00
FX-A6GPP-E-KIT V 1.00 from V 2.00
Data access units
FX-10DU-E V 1.10 from V 2.00
FX-20DU-E V 1.10 from V 2.00
Other DU units from V 1.00
Existing Instruction And Special M Coil Combination To Mimic The Operation Of The
Identified Instruction
Existing FX instruction used to mimic the operation of......
Mnemonic FNC number Modifying M coil Mimicked instruction Mnemonic FNC Number
MOV 12 M8190 Square root SQR 48
MOV 12 M8191 Float FLT 49
RAMP 67 M8193 Data search SER 61
RAMP 67 M8194 RS232 instruction RS 80
FMOV 16 M8196 Hex to ASCII conversion ASCI 82
FMOV 16 M8197 ASCII to Hex conversion HEX 83
FMOV 16 M8195 Sum check CCD 84
Pro
rammin
tools operatin
old s
stem software can not access the new features added to
the FX CPU from version 3.07 (and available on all FX
2C
units). However, pro
rammin
certain ‘standard’ applied instructions in con
unction with special auxiliar
coils (M coils) can
achieve the same ’effective instruction’ as the new instructions. The followin
tables identif
which version of peripheral software will work directl
with all of the ’new’ features and which
peripheral software versions require use of modified instructions.
D10
K36
SET
M8190
D10
K36
SQR
MOV
Using existing FX functions......
to mimic......
