924
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
B Instruction Execution Time
B-1 Basic Instruction Execution Time
*1. M1536 to M3583, M8256 to M8511, S1024 to S4095
*2. M1536 to M3583, M8000 to M8511
*3. M3584 to M7679
Output instructions
RST S 4.6 0.13
RST T 0.45 0.45
RST C 0.45 5.8 0.45 4.8
RST D 5.4 ⎯ 0.195 ⎯
PLS Y,M 0.257 0.321 µs in M3584 to M7679
PLF Y,M 0.257 0.321 µs in M3584 to M7679
Master control instructions
MC 4.3 4.7
MCR 3.9 ⎯
Other instruction
NOP 0.065
End instruction
END 113.9 + 2.13X + 3.25Y ⎯
Even if FEND and END are used
together, execution time of only END is
required.
X: Number of input points
Y: Number of output points
Instruction
Execution time in ON status (µs) Execution time in OFF status (µs)
Remarks
16-bit instruction 32-bit instruction 16-bit instruction 32-bit instruction
