Multiquip LS600P Manual

A SERVICE OF

next previous



2. If the hydraulic oil level is low, remove the hydraulic oil

tank cap just above the oil level sight glass (Figure 14)

and add the correct amount of hydraulic oil to bring the

hydraulic oil level to a normal safe operating level. Use

Shell oil Tellus 68 or Mobil oil DFE26.

Figure 14. Adding Hydraulic Oil (Filler Hole)

3. Check the oil level in the lubrication box (Figure 15).

If low, ﬁll with up to 3 gallons of SAE #30 motor oil

(Figure 14). The oil level must be checked daily. The

lubrication box should be serviced as described in the

maintenance section.

Figure 15. Filling the Lubrication Box

CAP

FILLER

HOLE

TOP

COVER

LUBRICATION

BOX

INSPECTION