A SERVICE OF

logo

Maintenance
6-6
Part 7119745C
E 2007 Nordson Corporation
MiniCure 08-07
Disconnect the conveyor motor supply cable by unplugging the orange
connector, reach in through the control panel aperture.
FIG. NUV8A
1
2
Figure 6-7 Control Panel Aperture
1. Fuses 2. Motor Connector
(Orange Color)
Remove the 4 x M8 hexagon key bolts that secure the conveyor top in
place.
With assistance, the complete conveyor assembly can now be removed
from the lower cabinet to reveal the electrical components.
When replacing the conveyor, extra assistance may be required to feed the
lamp supply cables back through the grommets. Also, ensure that the fan
duct locates correctly into the fan before replacing the M8 bolts.