66
OKIFAX 4500
6. To select another user function, press the STOP key and
return to step 4.
7. Press the SELECT FUNCTION key to finish.
Setting Distinctive Ring
Note: In some countries, distinctive ring service is not
available from the local telephone company.
1. Press the SELECT FUNCTION key.
2. Press the USER PROG One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ßß
ßß
ß) NO (
àà
àà
à/1-7)
3. Press the ô YES key. The display shows:
FUNCTION NO.[ ]
ENTER 01-28
4. Using the numeric keypad, enter 12. The display shows:
12:DISTINCTIVE RING
[OFF] YES (
ßß
ßß
ß) NO (
àà
àà
à)
5. Press the NO õ key. The display changes to:
12:DISTINCTIVE RING
[SET] YES (
ßß
ßß
ß) NO (
àà
àà
à)
6. Press the ô YES key. The display changes to:
SETUP FAX RING
CALL FAX NUMBER NOW
7. Using a separate telephone line, immediately dial the number
assigned to the fax machine (you must do this within 90
seconds). When your fax machine begins to ring, the display
changes to:
AUTO DETECTING
RING PATTERN
Your fax machine then automatically detects and remembers
its assigned ring pattern. When your fax machine has
finished programming its ring pattern, the display shows:
DISTINCTIVE RING SET
RESULT=OK
After detecting and remembering the ring pattern, the display
changes to:
DISTINCTIVE RING
[ON] YES (
ßß
ßß
ß) NO (
àà
àà
à)
8. Press the ô YES key to confirm your selection.
9. Press the SELECT FUNCTION key to finish.
Note: Occasionally, your fax machine may not be able to
detect the ring pattern on its first try. If this happens, the
display changes to:
DISTINCTIVE RING SET
RESULT=NG
If this happens, follow the above instructions again.
