27
Job Control (cont.)
6. Use the same procedure as step 5 to
enter the password from the second
digit to the fifth digit and then press
OK.
7. Select execution or cancellation of
printing, or data retention after
printing, and then press
OK.
• Deletion or retention of data after
printing can be selected. Alternatively
deletion of data without printing can
be selected. Press
▼ or ▲ until the
desired choice appears.
• If this item is selected, the operation is
completed. Steps 8 and 9 are not
needed.
8. Verify that
the desired
number of
copies is set.
The number of copies
can be changed by using
▼ or ▲ on
the operator panel.
9. Press
OK. Printing will start. If
printing of another job is being
executed, however, your job will be
registered as a print job. Printing of
the job will start after preceding jobs
are completed.
10.Operation is now complete.
11.To continue operation, repeat steps 1
to 9.
PRINT AND
DELETE
DATA - OK?
▼
• Data will be
deleted after
printing.
PRINT AND SAVE
DATA -OK?
▼
• Data will be held
after printing.
DELETE THE
DATA OK?
▼
• Data will be
deleted
without printing.
10 SET
COPIES
