4
Remove the screen film.
Set up your Palm VII
™
handheld
Install the AAA batteries and charge the transmitter.
Follow the instructions onscreen to set up your handheld.
Hints: If your handheld does not turn on automatically, make sure the batteries are
installed correctly (see the picture above). If that’s not the problem, install
different batteries. If your handheld still does not turn on, go to page 12 for
more suggestions.
IMPORTANT!
The moment you insert the
batteries, they begin to charge
the transmitter you’ll use with
the Palm.Net
™
wireless
features; this takes about
70 minutes. As soon as the
transmitter has been charged,
you can activate the service.
(For more information, see
page 7.)
3.
4.
2.
Push up on the stylus
to remove it.
