- 7 -- 14 -
PARTS LIST
(MOTOR HOUSING, MOTOR, HANDLE, AND BODY)... BLOCK
C
Ref. No. Part Name & Description Part No. Quantity Remarks
C-1 Dust Container, Machined AC88KAPNZV17 1 (Includes C-38, C-44, C-45, C-46, C-47, C-48)
C-2 Switch, ON/OFF AMC98E-VØØØU 1 (Includes C-38, C-46)
C-3 Power Cord AC94EAPNZYØ2 1 (Includes C-38, C-44, C-45, C-46)
C-4 Wire Nut AMC-1CTCE23 4
C-5 Packing Dust Container AC66KVØ1VØ6 2
C-6 Switch, Cover ACØ3EVØ7VØ6 1 (Includes C-46)
C-7 Packing Switch Cover AC73KVØZVØ6 1
C-8 Switch Cover Screw AXTN+16BFY 2
C-9 Screw, Handle AMC73B-VØØ 1
C-10 Nut, Handle Screw AMP21B-17Ø 1
C-11 Supporter, Filter AMC32K-VØØ 1
C-12 HEPA Filter, Secondary AC37KAAEZØØ 1
C-13 Wheel AMCØ1C-VØØU 2
C-14 Roller Shaft AC16CUSZØØ 1
C-15 Wheel Stopper AC74SUSZØØ 2
C-16 Washer AXWG6E115FY 2
C-17 Dust Bag AC16KBYTZØØØ 1
C-18 Screw, Hose Holder AXTN4+45BFY 1
C-19 Cover, Inlet ACØ2HYUZVØ6 1
C-20 Screw, Inlet AXTN4+16BFY 2
C-21 Motor Case AC99FAAEZVØ7 1
C-22 Packing, Rear Cover AMCØ2L-VØØ 1
C-23 Packing, Motor Case AC19FJPZVØ6 1
C-24 Screw, Motor Case AXTN4+2ØBFY 4
C-25 Fan Motor AC92FAPNZØØ 1
C-26 Cover Cap AC38HAPNZØU 1
C-27 Screw, Ground AXYN4+E1ØFFY 1
C-28 Noise Suppressor AC99GAMMZØØ 1
C-29 Motor Support, Rear AMCØ3F-VØØ 1
C-30 Motor Support, Front AMCØ2F-EØØ 1
C-31 Wirecord AC37GTEZØU 1
C-32 Wire Nut AMC-1CTCE23 3
C-33 Handle AC64BATNZØØ 1
C-34 Motor Lead Assembly AC99WARGZØØ 1
C-35 Dust Cover AC6ØKCCAZUU3 1
C-36 Stretch Hose AC84PJPZVØ6 1
C-37 Hose Holder AC23PJPZVØ7 1
C-38 Tie Cable AMC596-7ØØ 1
C-39 Motor Protector AC69KJMZVØ6 1
C-40 Protector Spring, Silver AC7ØKJMZØØ 1
C-41 Protector Support AC18MJMZVØ6 1
C-42 Protector Case AC68KJMZVØ6 1
C-43 Rubber Protector AC51E4GZUØ1 1
C-44 Flat Washer AXWE1ØJ223FE 1
C-45 Cord Retainer ACØ6WAPNZØØ 1
C-46 Packing AC61LAGMZØØ 1
C-47 Hose Hook AC53RJPZVØ7 1
C-48 Crevice Tool AC6ØRZFZVU6 1
C-49 Dusting Brush AC88RYUZVØ6 1
C-50 Wand, Extension AC4ØPJP1VØ6 1
C-51 Wand Holder AC7ØPJPZVØ7 1
C-52 Screw, Tool Holder AXTN4+16BFY 3
C-53 Cap, Motor AC93FTEZØU 1
C-54 Handle Assembly AC95BATNZVØ7 1 (Includes C-18, C-33, C-37)
Removal
1. Remove the dust cover and switch cover to expose the electrical connections of the power cord, ON/OFF switch, and wire cord.
2. Pull the power cord into the dust compartment in order to remove the strain relief (for power cord replacement) by prying or cutting,
remove the wire connectors, and wire tie, if present.
3. Remove the ON/OFF switch (for ON/OFF switch replacement) by depressing the switch retaining tabs while pushing up out of the
dust compartment at the same time.
4. Pull the power cord out of the dust compartment (for power cord replacement).
(Continued on p. 14)
POWER CORD/ON-OFF SWITCH REPLACEMENT
SWITCH COVER AREA WIRING MANAGEMENT
(Approx. 1 1/8 in./30 mm
