E
N
G
L
I
S
H
6
CQ-DF202W
15
E
N
G
L
I
S
H
5
CQ-DF202W
14
CD Player and CD Changer Control
Track Selection
[5TRACK]: Advance to the next track.
[6TRACK]: Back to the beginning of the
current track.
Back to the previous track.
(Press twice.)
Track Search
Press and hold ...
[5TRACK]: Fast forward
[6TRACK]: Fast backward
Release to resume the regular play.
Display Change
Press [DISP] (CLOCK) to switch to the clock dis-
play.
CD player:
Mode Selection
Press [SOURCE] to change to the CD player or CD
changer mode.
Playback will start automatically.
Caution:
≥Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
≥This unit does not support CD-ROM, CD-R or CD-RW playback through the CD changer. Use the CD
changer to listen to normal music CD exclusively.
≥This unit does not support CD text display.
≥This unit does not support MP3 disc playback.
≥Refer to page 21 about notes on CD-Rs/RWs.
≥This unit is not designed for any 8 cm disc.
≥If you insert an 8 cm disc and can not eject it, turn ACC of your car off once and turn it on again, then
press [<] (eject).
≥Do not use irregular shaped discs.
≥Do not use discs that have a seal or label attached.
≥Do not insert foreign matter into the disc slot.
Direct Track Selection
≥Press a track number button from [1] to [6].
The corresponding track starts playing.
≥Press and hold a track number button from [7] to
[12] ([1] to [6]) for more than 1 second.
The corresponding track starts playing.
CD player
Direct Disc Selection
≥Press a disc number button from [1] to [6].
The corresponding disc starts playing.
≥Press and hold a disc number button from [7] to
[12] ([1] to [6]) for more than 1 second.
The corresponding disc starts playing.
CD changer control
<CD player display>
Track number Track playing time
Track number/
track playing time
≥Do not insert a disc when the indi-
cator lights.
≥Lights when the disc is loaded.
Clock display
Clock display
Listening to a CD
1 Press [OPEN] on the front panel.
2 Press [<] (eject) to stop CD play and eject the disc.
Disc Insert and Playback
Stop and Disc Eject
1
Open the front panel
Press [OPEN] to open the front panel.
Disc insert
Playback will start automatically after the
player recognized the loaded disc as an ordi-
nary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the
same as an ordinary music CD is loaded,
this player recognizes it as an ordinary
music CD.)
Close the front panel manually.
2
Note:
≥The CD changer functions are designed for Panasonic CD changer unit (optional).
≥Do not insert a disc when the indicator lights.
