E
N
G
L
I
S
H
10
CQ-DF802W
25
E
N
G
L
I
S
H
9
CQ-DF802W
24
CD Player
Note:
≥Loading a disc when the power is off allows the
power to be turned on.
Open the front panel.
Press [OPEN] on the front panel.
1
Insert the disc.
Playback will start automatically after the
unit recognized the loaded disc as an ordi-
nary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the
same as an ordinary music CD is loaded,
this unit recognizes it as an ordinary music
CD.)
Close the front panel manually.
2
Disc Insert and Playback
Stop and Disc Eject
1 Press [OPEN] on the front panel.
2 Press [<] (eject) to stop CD play and eject the
disc.
CD player mode display
≥Do not insert a disc when “DISC” indi-
cator lights.
≥Lights when the disc is loaded/played.
Caution:
≥Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
≥This unit does not support CD text display.
≥This unit does not support MP3 disc playback.
≥Refer to page 47 about notes on CD-Rs/RWs.
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not use irregular shaped discs.
≥Do not use discs that have a seal or label attached.
≥Do not insert foreign matter into the disc slot.
≥The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do
not touch anything here except [<] (eject).
≥The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Be care-
ful when inserting a disc or pressing [<] (eject).
Track Selection
/[$]: Advance to the next track.
/[%]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Pause
Press [BAND] (;/1).
Press [BAND] (;/1) again to cancel.
Listening to a CD
Track Search
Press and hold.
/[$]: Fast forward
/[%]: Fast backward
Release to resume the regular play.
Direct Track Selection
Example: track number 10
1 Press [„] (NUMBER).
2 Press [1] [0].
3 Press [SET] to set.
The corresponding track starts playing.
Display Change
Press /[DISP] (display) to change the dis-
play.
DISPLAY
Track number/track
playing time (Default)
Clock display
CD Player Mode
(When a CD is in the player.)
Press /[SOURCE] to change to CD
player mode.
Playback starts automatically.
SOURCE
Note:
≥Press /[DISP] (display) or [„] (NUM-
BER) to return to the regular mode.
≥If a non-existent track number is input and en-
tered, the command is invalid and the display re-
turns to regular mode.
DISPLAY
Track playing time
Track number
Note:
≥Ejecting the disc when the unit is in the CD player
mode allows the power to be turned off.
Only for the remote control unit
Repeat and random indicator
