![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/62/e627c0ff-8f7d-4fd5-9aa7-ab14bd8c4b4e/e627c0ff-8f7d-4fd5-9aa7-ab14bd8c4b4e-bg7.png)
7
English
Reading lamps when using
While using
ES‑RF41 ES‑RF31
Approximate amount of
battery charge is displayed as
20 ‑ 100 (%) and then turns off
after 5 seconds.
Approximate amount of battery
charge is displayed as LOW ‑
HIGH
and then turns off after 5
seconds
.
When the battery capacity is low
ES‑RF41 ES‑RF31
“20%” blinks when turning off
the shaver.
You can shave 1 to 2 times
after “20%” appears. (This
will differ depending on
usage.)
•
“LOW” blinks when turning off
the shaver.
You can shave 1 to 2 times
after “LOW” appears. (This
will differ depending on
usage.)
•
A full charge will supply enough power for approx. 21 shaves of
3 minutes each.
•
Clean
Cleaning the shaver
1. Disconnect the power cord from the shaver.
2. Apply some hand soap and some water to the outer foil.
3. Rotate the lock ring [D5] to unlock the power switch [D9].
4. T
urn the shaver on.
5. Turn the shaver off after 10‑20 seconds.
6. Remove the outer foil section [B] and
turn the shaver on.
7. Clean the shaver and the outer foil
section [B] with running water.
8. Wipe off any drops of water with a dry
cloth.
9. Dry the outer foil section [B] and the
shaver completely.
10.
Attach the outer foil section [B] to the
shaver.