4. Telephone
29
To search for a name by first character
(index search)
1. Press {k}, then press {R}.
2. Select “Index Search”, then press {>}.
3. Select the character entry mode that
contains the character you are searching for,
and press {>}.
4. Press the dial key ({0} to {9}) which contains
the character you are searching for (page
81).
L Press the same dial key repeatedly to
display the first item corresponding to
each letter located on that dial key.
L If there is no item corresponding to the
letter you selected, the next item will be
displayed.
5. Press {v} repeatedly to display the desired
item.
To search for a name by category
1. Press {k}, then press {R}.
2. Select “Category Search”, then press
{>}.
3. Select the category you want to search, then
press {>}.
L The first item in that category is displayed.
L If you select “All”, the unit will end the
category search.
4. Press {v} repeatedly to display the desired
item.
4.4.4 Editing a stored item
1 Press {k}.
2 Press {e} or {v} repeatedly to display the
desired item.
L To search by first character (index
search), see page 29. To search by
category, see page 29.
3 Press {j/OK}.
4 Select “Edit”, then press {>}.
L If you do not need to edit the name, skip
to step 6.
5 Edit the name. For further details, see the
storing procedure on page 28.
6 Press {j/OK}.
L If you do not need to edit the telephone
number, skip to step 8.
7 Edit the telephone number. For further
details, see the storing procedure on page
28.
8 Press {j/OK}.
9 Select the desired category for the item, then
press {>}.
10 Select “Save”, then press {>}.
L To edit other items, repeat steps 2 to 10.
11 Press {ih}.
4.4.5 Erasing stored items
To erase an item
1 Press {k}.
2 Press {e} or {v} repeatedly to display the
desired item.
L To search by first character (index
search), see page 29. To search by
category, see page 29.
3 Press {j/OK}.
4 Select “Erase”, then press {>}.
5 Select “Yes”.
L To cancel erasing, press {ih}.
6 Press {>}.
7 Press {ih}.
To erase all items
1 Press {k}, then press {j/OK}.
2 Select “Erase All”, then press {>}.
3 Select “Yes”, then press {>}.
4 Select “Yes” again, then press {>}.
5 Press {ih}.
4.4.6 Chain dial
This feature allows you to dial phone numbers in
the cordless handset phonebook while you are
on a call. This feature can be used, for example,
to dial a calling card access number or bank
account PIN that you have stored in the cordless
handset phonebook, without having to dial
manually.
1 During a phone call, press {k}.
2 Press {e} or {v} repeatedly to select the
desired item.
L To search by first character (index
search), see page 29. To search by
category, see page 29.
3 Press {>} to dial the number.
FC962HK-PFQX2283ZA-en.book Page 29 Thursday, September 15, 2005 4:20 PM
