4-44 System Programming
[400]-[401] 4.2 System Programming
Assigns which exchange line(s) is connected to the system or not.
* Exchange line number: 1 through 6 / (All exchange lines)
Default All exchange lines – Connect
• Feature Reference
Section 3, Features
Outside Calling
Selects the dialling mode, DTMF, Pulse or C. BLK (Call Blocking), for each exchange line.
DTMF: The dialling signals from an extension, either Tone or Pulse, are converted to
Tone and transmitted to the Local Exchange. If the system is connected directly
to the Local Exchange or installed behind a host PBX, which receives both Tone
and Pulse, select this mode.
Pulse : The dialling signals from an extension, either Tone or Pulse, are converted to
Pulse and transmitted to the Local Exchange.
C. BLK: If your Local Exchange can receive both DTMF and Pulse signals but the user
are contracted for Pulse, select this mode. When dialling with a touch tone
telephone, only Pulse signals are sent to the Local Exchange.
* Exchange line number: 1 through 6 / (All exchange lines)
Default All exchange lines – DTMF Mode
• Feature Reference
Section 3, Features
Pulse to Tone Conversion
[400] Exchange Line Connection Assignment
[401] Dial Mode
(Connect/
Not connect)
(1
···
6/ )
(DTMF/Pulse/
C.BLK Mode)
exchange line no.*
exchange line no.*
(1
···
6/ )
or
or
☞
☞
PSQX1708ZA-09E.QX 99.10.15 1:03 PM Page 44
