Useful Information
50
For assistance, please visit http://www.panasonic.com/phonehelp
Programmable settings
Making/answering calls, intercom
Problem Cause/solution
You cannot program
function items, such
as the dialing mode.
LProgramming is not possible while in the talk or intercom
mode.
LDo not pause for over 30 seconds while programming.
LMake sure that the unit is in standby mode.
Problem Cause/solution
Static is heard, sound
cuts in and out.
LIf your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter between
the unit and the telephone line jack (see “Connecting 2
two-line telephone jacks” on page 18, “Connecting four
single-line telephone jacks” on page 19). Contact your
DSL provider for details.
You cannot redial the
last number dialed.
LIf the last number dialed was more than 32 digits long, the
number cannot be redialed.
LAccess numbers entered after pressing {*} (TONE) will
not be included when redialing.
You cannot have a
conversation using
the headset.
LMake sure that {HEADSET} is pressed.
LMake sure that the headset is plugged into the headset
jack properly (see “Connecting the optional headset to the
unit” on page 44).
During a power
failure, you cannot
make or answer a
call.
LMake sure that a battery has been installed properly (see
“Battery installation” on page 12).
LThe battery may have been discharged. In that case,
replace the battery with a new one (see “Battery
replacement” on page 12).
The intercom does not
work.
LDSL Internet connection and KX-TS4100/KX-TS4200/
KX-TS4300 Intercom work at similar frequencies. Please
contact Panasonic at 1-800-211-PANA (1-800-211-7262)
for special wiring configurations.
You cannot page
other extension.
LThe unit is in use. Try again later.
You cannot answer the
transferred call even
if the display shows
“Transfer From
xx”.
LThe transferred call was disconnected before you
answered it.
