- 36 - - 13 -
Voltaje
Protector termal
Extensión de cordón
Herramientas
120 V c.a. (60 Hz)
Si 15.2 m (50 pi) Si
Power Thermal Protector Cord Length Tools
120V AC (60 Hz)
Yes 15.2 m (50 Ft.) Yes
Alimentation
Protecteur thermique
Longueur du cordon Accessoires
120 V c.a. (60 Hz)
Oui 15.2 m (50 pi) Oui
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Cleaning Exterior and Tools
➢➢
Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
➢➢
DO NOT drip water on vacuum cleaner
➢➢
Wipe dry after cleaning.
➢➢
DO NOT clean tools in dishwasher or clothes washer.
➢➢
Wash tools in warm soapy water, rinse and air dry.
➢➢
DO NOT use tools if they are wet.
Cleaning Agitator
➢➢
Clean agitator after every five uses
and every time the belt is replaced.
➢➢
Remove lower plate. See: “Removing
and Installing Lower Plate”
➢➢
Cut off any hair, thread, string, carpet
pile, and lint entangled around
agitator with a pair of scissors.
➢➢
Remove agitator. See: “Replacing
Belt”
➢➢
Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢➢
Reinstall agitator and lower plate.
See: “Removing and Installing Lower
Plate”
