- 44 -
Removing Clogs
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢
Check the hose area.
➢
Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
➢
Visually inspect the hose and the
base area into which the hose is
connected.
➢
Remove any visible clog.
➢
Re-connect the extension hose to the
dust bin port assembly.
➢
Plug in the vacuum cleaner and turn it
on.
➢
Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
➢
Turn the unit off and unplug the unit.
➢
Remove dust bin and check dust bin
port and secondary filter for clogs.
➢
If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.
