2 Use [3, 4] to select the play
list.
3 Press [ENTER].
3. Use [3, 4, 2, 1] to select a scene and
press [ENTER].
3. ≥If there are more than 9 scenes, use [3,
4, 2, 1] to select “Next” and press
[ENTER]. Select “Prev” to move back.
≥You can also select items with the remote
control’s numbered buttons.
≥Select an item to start play
≥Programs and play lists: Press the numbered
buttons.
≥To select a two-digit number:
≥ e.g. “25”:[S10]>[2]>[5]
≥Scene list pages: Press the numbered buttons
then press [ENTER].
≥ e.g. “25”: [2]>[5]>[ENTER]
To display information about a program or
play list
1. Select the program or play list and move the
cursor jockey [1].
2. (For play lists) Use [3, 4] to select
“Contents” and press [ENTER].
Use [2, 1] to show other programs or play
lists.
To clear the list
DIRECT NAVIGATOR: Press [TOP MENU].
Play list: Press [MENU].
(The unit returns to the condition it was in before
you called up the list.)
To return to the previous screen
Press [RETURN].
Note
≥Titles appear only if you have entered them.
≥You cannot change titles.
1. Select the play list and move the cursor
jockey [1].
2. Use [3, 4] to select “Scene List” and press
[ENTER].
Page/Total pages
2 Use [3, 4] to select the
program.
The selected program plays in the
background.
3 Press [ENTER].
Playing the programs or play lists on DVD-RAM
[RAM]
Playing specific scenes
Playing a play list
You can play a group of scenes, a play list,
created on other equipment such as a DVD
video recorder.
1 Press [MENU].