35
Basic Operation
34
Using the D.ZOOM (digital zoom)
function
This function lets you enlarge the
picture.
#Press a D.ZOOM +/- button
[
The picture will then be enlarged
to 1.5 times the normal size.
$Use the F, G, I and H buttons
to move the enlarged area
which you want to project.
&Press the MENU button to
return to the normal screen.
NOTE:
BThis function can only be used
when using the remote control
unit.
BIf the type of signal being input
changes while the digital zoom
function is being used, the digital
zoom function will be cancelled.
%Use the D.ZOOM +/- buttons to
change the enlargement ratio.
The enlargement ratio can be
changed within the range of x1 to
x4, by 30 steps.
Returning a setting to
the factory default
Select the STANDARD from the
menu screen by pressing the F or
G buttons and then press the
ENTER button to return all items
displayed on the screen to their
factory default settings.
BWhen a menu screen is being
displayed
