•
Initial Setup
•
Connection
Connection
DVD Recorder or VCR
or
VHF / UHF aerial
Rear terminal portion
(enlarged view)
Rear of the TV
Mains lead
Fastener
•
To unfasten
■
Watching TV
(Connect after all the other connections.)
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Note
•
Do not put the Coaxial cable close to the mains lead to avoid noise.
•
Do not place the Coaxial cable under the TV.
•
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ω
coaxial) and the correct
terminating plug are required.
•
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
•
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
75
Ω
Coaxial cable
■
To record TV
programmes
Turn the TV On with the On / Off switch
1
Need help
with operations?
(example: Sound menu)
On-screen operation
guide will help you.
Initial Setup
These steps are not necessary if the setup has been completed by your local dealer.
•
From now on you can use the
remote control to turn On the TV
or turn the TV to standby mode.
2
Input owner ID
Usable characters
and numerals
Following the on-screen operation
guide, enter your PIN number and
name.
•
For detailed procedures
"Owner ID" (p. 22)
•
Make a note of the PIN number
in case you forget it.
■
To input owner ID later
•
If you input the ID later
"Owner ID" (p. 22)
This TV has been pre-tuned by the factory
to the following Australian TV channels.
If your location does not receive these channels,
perform "Auto Tuning" (p. 10).
Programme No. Channel No.
22
77
99
10 10
28 28
31 31
