14
Auto Setup
Auto Setup
Search and store TV channels automatically.
● These steps are not necessary if the setup has been completed by your local dealer.
● Please complete connections (p. 10, 11) and settings (if necessary) of the connected equipment before starting
Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
1
Plug the TV into mains socket and switch On
● Takes a few seconds to be displayed.
● If the red LED shows on the TV, press the Standby On / Off switch on the remote control.
2
Select your country
Country
United Kingdom Ireland
OK
select
access
3
Start tuning
Automatic Channel Search
Status : Scanning...
Analogue : 1
Digital : 0
EXIT
RETURN
Scan 2%
● Auto Setup will start to search for TV channels
and store them in the numbered order as
specied by the broadcasters.
● Actual number of channels may differ due to
channel duplication.
5
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home Shop
OK
change
conrm
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
● You can return to viewing environment selection screen at the stage of [Shop] conrmation screen.
1 Return to viewing environment selection
screen
2 Select [Home]
Shop
You have selected shop mode
Please select your viewing environment.
Home Shop
OK
change
conrm
To change viewing environment later on, you will need to initialise all settings by accessing
[Shipping Condition]. [Shipping Condition] (p. 22)
Auto Setup is now complete and your TV is ready for viewing.
