21
x Attach the safety wire to the safety wire attachment hole.
q Pass the loop end of the safety wire through the safety wire attachment hole.
w Hook the loop end of the safety wire on the safety wire hook.
When installing on a wall
<Required camera mount bracket and safety wire kit>
• Camera mount bracket: WV-831
• Safety wire kit: WV-Q140
z Attach the safety wire attachment bracket for wall mounting (provided) to the screw hole
for the camera mount bracket using the fixing screw (provided).
Important:
• Use the provided screw to attach the
safety wire attachment bracket for wall
mounting.
When a screw other than the removed
screw (with a different height) is used, it
may result in drop or damage of the
camera.
Recommended tightening torque: 0.39
N·m
safety wire here.
