® Pelco, the Pelco logo, Spectra, Spectra II, Genex, Legacy, Esprit, Camclosure, and Intercept are registered trademarks of Pelco. © Copyright 2005, Pelco.
® Lexan is a registered trademark of General Electric Company. All rights reserved.
REVISION HISTORY
Manual # Date Comments
C1519M 6/01 Original version.
C1519M-A 5/02 Added
Models
section. Added ferrite information to
Installation
section. Added Step 5 to
Configuring the COM Ports
. Revised
default function for F9-F11 per ECO #01-7510. Revised Table M. Added
Deleting Presets
section. Revised
Macros
and
Sequence
sections. Updated
Regulatory Notices
.
C1519M-B 1/03 Revised
Calibrating the Joystick
section per ECO #02-8581 and ECO #02-8394.
C1519M-C 8/05 Revised manual per ECO #04-10657. Revised first note on page 12. Removed last note on page 12 and revised the
Calibrating the Joystick
section. Added two notes on page 27.
WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective
in material or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
• Five years on FT/FR8000 Series fiber optic products and the following fixed
camera models: CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X,
MC3651H-2, and CC3651H-2X.
• Three years on all other fixed camera models (including Camclosure® Inte-
grated Camera Systems) and Genex® Series (multiplexers, server, and key-
board).
• Two years on all standard motorized or fixed focal length lenses.
• Two years on Legacy
®
, CM6700/CM6800/CM8500/CM9500/CM9700 Series
Matrix, DF5 and DF8 Series Fixed Dome products.
• Two years on Spectra
®
, Esprit
®
, and PS20 Scanners, including when used in
continuous motion applications.
• Two years on Esprit
®
and WW5700 Series window wiper (excluding wiper
blades).
• Eighteen months on DX Series digital video recorders and NVR300 Series
network video recorders.months on DX Series digital video recorders, NVR300
Series network video recorders, and all Endura™ Series distributed network-
based video products.
• One year (except video heads) on video cassette recorders (VCRs). Video
heads will be covered for a period of six months.
• Six months on all pan and tilts, scanners or preset lenses used in continuous
motion applications (that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of
Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid
to Pelco, Clovis, California. Repairs made necessary by reason of misuse,
alteration, normal wear, or accident are not covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence,
infringement of any rights of any party or product liability, relating to the
Products shall not exceed the price paid by the Dealer to Pelco for such
Products. In no event will Pelco be liable for any special, incidental or
consequential damages (including loss of use, loss of profit and claims of third
parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer
may also have additional rights, which are subject to variation from state to
state.
If a warranty repair is required, the Dealer must contact Pelco at (800)289-
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and
provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice num-
ber
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall
under the warranty conditions stated above, please include a written
explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which
the item was received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization
number (CA number if returned for credit, and RA number if returned for
repair).
All merchandise returned for credit may be subject to a 20% restocking and
refurbishing charge.
Goods returned for repair or credit should be clearly identified with the
assigned CA or RA number and freight should be prepaid. Ship to the
appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico,
send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico
and are instructed to return goods to the USA, you may do one of the
following:
If the goods are to be sent by a COURIER
SERVICE, send the goods to:
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
Phone: 650-737-1700
Fax: 650-737-0933
If the goods are to be sent by
a FREIGHT FORWARDER,
send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA
94080 USA
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive
2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE).
Contact your local dealer for procedures for recycling this equipment.
