5.5.2EasyLink Remote Control
With EasyLink Remote control, the TV remote control
commands are sent directly to the device you are watching
on TV.
Except for the Home h key, all remote control commands
will try to operate the device. Some commands might not
work with the device.
The TV comes with EasyLink Remote control set to On.
To switch EasyLink Remote control off, press h > Setup >
Installation > Preferences > EasyLink Remote control.
EasyLink must be switched on before you can switch on
EasyLink Remote control.
Switch the remote control commands
To switch to TV control, press h and select Watch TV.
To control another device, press h and select the other
device.
Downloaded From TV-Manual.com Manuals
