ENGLISH 15ENGLISH14
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
1 Always turn razor OFF, remove the
charging plug from outlet and remove cord
from razor before cleaning.
C 2 Press the Razor Head Release Button,flip
open the Razor Head Assembly.
C 3 Clean inside razor heads and hair chamber
by running under hot water.
C 4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
NO
TE: Do not wipe or dry the sha
ving heads
with a to
wel or tissue.
This could damage the
shaving heads.
C 6 Open Razor Head assembly again and
leave open to air dry.
4 Close trimmer by sliding trimmer switch
down.
5 Turn razor OFF.
Cleaning
C ◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
Every Week: Razor Heads
◗ The easiest and most hygienic way to clean
the razor heads and hair chamber is to rinse
them after each use or at least once a week
with hot water: Water from the tap should
be on a hot setting,BUT BE CAREFUL TO
TEST WATER FIRST SO AS NOT TO BURN
OR SCALD HANDS.
