A rectangle will be displayed on rst line of the display. The position
»
of this rectangle indicates the signal strength (the further towards
the right, the greater the signal strength).
The second line of the display shows the selected channel and its
»
frequency.The rst line of the display shows a rectangle.
Tip
Adjust the position of the antenna to obtain the optimum signal strength.
•
[DRC]
Dynamic range control (DRC) adds or removes a degree of compensation
for the differences in the dynamic range between radio stations.
•
[DRC high] (DRC is switched on; the default setting
recommended for noisy environment.)
•
[DRC low] (DRC is set to half normal level.)
•
[DRC off] (DRC is switched off.)
[Full scan] and [Local scan]
Local scan is used to perform a small range of DAB radio search (in UK). Full
scan is used to perform a wide range of DAB radio search (outside UK).
Note
If no button is pressed within seven seconds, the menu exits.
•
English
EN
AE5200_05.indd 17 3/24/2009 10:48:22 AM
